Model: SCZ-300A-1000V-EU G001 12VL
Max operating temperature
Min operating temperature
Rated current: DC+/DC-: 300A, L1/L2/L3/N: 32A
Applicable wire diameter: 95mm², Insulation outer diameter: Φ17.3±0.3
Using ultrasonic welding technology, the temperature rise is low and stable
12V electronic lock on the left side
Meet TUV/CE certification requirements
Plug-in dust protection cap; this model supports front mounting
10,000 plug and unplug cycles, stable temperature rise
SCZ series European standard CCS 2 socket are installed on electric vehicles, CCS type 2 inlet. By cooperating with CCS combo 2 DC charging cable, the DC charging function is realized. The products meet IEC 62196.3-2022 and RoHS requirements.
Outer diameter: Φ17.3±0.3
DC+/DC-: 1000V DC;
L1/L2/L3/N: 480V AC;
PP/CP: 30V DC
|Withstand voltage||3000V AC / 1min. (DC + DC- PE)|
|Insulation resistance||1000V DC, ≥5000MΩ (normal temperature and humidity); ≥100MΩ (humid state)|
|Terminal temperature rise||<50K|
|Electronic locks location||left side|
|Insertion/withdrawal cycles||>10,000 times|
|Degree of Protection|
IP55(When not mated)
|Salt spray class||96h|
|Sealing part||Silicone Rubber|
|Contact part||Copper alloy|
|Mounting type||Front mounting (0 to 90 degree frontal inclination possible)|
|Mounting hole diameter||6.5 mm (ø)|
PT1000 temperature monitoring principle:
AC: 1 temperature sensor installed at L1 terminal
DC: 2 temperature sensors are installed at the DC+/DC- terminals respectively
Temperature sensor model: PT1000, the temperature sensor model can be adjusted according to customer needs.
Suggested temperature control method: limit the charging current when the temperature reaches 100°C, and stop charging when the temperature reaches 120°C.
Requirement reason: IEC62196 stipulates that the working temperature of charging products is -30℃～+50℃, and the maximum temperature rise of the terminals is 50K. When the temperature reaches 100°C, the current should be limited to avoid continuous temperature rise. In order to prevent the internal components and cables of charging products from aging at high temperatures, the charger should stop charging when the temperature reaches 120°C.
PT1000 temperature sensor parameters
3000V AC (60s)
Flame retardant grade
If you are interested in our products, please feel free to send an email to email@example.com or fill out the message form below. Our sales representative will contact you within 24 hours.